Deskhaus Apex Pro
Four columns with an independent motor in each, a 600 lb rating and a twenty-year frame warranty — the Apex Pro is the frame people upgrade to after a two-leg desk disappoints them, and the accounts of that switch are strikingly consistent: the front-to-back movement simply stops. It is a base only, which suits its audience, because the people who buy it are usually pairing it with a slab they picked themselves. The paddle controller shows a live height readout, which turns out to matter when you have a drawer unit underneath and need to stop short of it. Two things to know before ordering. Deskhaus sells it as a preorder item, with the shorter and longer foot sizes on a 20-business-day lead time. And the brand's visibility in enthusiast discussion has drawn scepticism about how organic that enthusiasm is, which is worth knowing when you read glowing write-ups, this one included.
Who this desk fits
estimated, not measured
Reaching 22.5″ at the bottom and 48.5″ at the top, this desk can hit both a sitting and a standing elbow height for people roughly 4′8″ to 6′6″ tall.
How the height is quoted: Work-surface height with a 1-inch top, which is how Deskhaus quotes the range ("Includes 1" Work Surface"); the bare base sits an inch lower, and a 1.5-inch butcher block raises both ends by another half inch.
Enter your height — 5'11", 71 or 180cm all work.
What ~$925 buys: Bare four-leg frame with the standard keypad; you buy or build the top separately.
Specifications
At a glance
Features
- Four legs, one motor each, independently driven
- 600 lb rated lift
- 22.5–48.5 in at the work surface with a 1-inch top
- Accepts tops from 43 to 80 in wide
- Paddle controller with a live height readout and two presets; the Bluetooth handset option has three
- 20-year frame and motor warranty, 10 on electronics
In its favour
- Owners upgrading from two-leg frames describe the wobble at standing height as gone rather than reduced
- Twenty years on the frame and motors, ten on the electronics
- 600 lb carries a walnut slab, a tower and a full monitor arm with room to spare
- The paddle's live height readout makes it easy to stop above a drawer unit
- 22.5 inches is one of the two or three lowest minimums in the catalog
- Four independent motors rather than one motor driving four columns through linkage
Against it
- Frame only: budget another $150–$400 for a top before comparing it with complete desks
- The brand's prominence in enthusiast discussion has itself been questioned, so weigh recommendations carefully
- Sold as a preorder item, and the shorter and longer foot sizes carry a 20-business-day lead time
These points draw on the published specification and on what owners of this desk consistently report.
What owners say
Summarised from owner discussions and long-term write-ups, not from anything we tested ourselves.
The Apex Pro is the frame people name when the conversation turns to four legs, and the owner accounts behind that reputation are specific rather than vague: someone with a two-leg desk that swayed badly at standing height buys one, pairs it with a slab they chose themselves, and reports the problem gone rather than reduced.
The details owners volunteer are practical ones. The live height readout on the paddle gets used to stop above a drawer unit. The 22.5-inch minimum is low enough that people fitting flush pedestals have to program a lower limit so the desk does not descend onto them. And because it is a base only, the builds people post are the ones they wanted — walnut, butcher block, rough-sawn hardwood — rather than whatever a configurator offered.
One honest caveat: the brand is unusually visible in the communities where standing desks get discussed, and that visibility has itself been questioned. The desk appears to deserve its reputation; read individual recommendations with that context.
What owners like
- Owners upgrading from two-leg frames describe the change as total — one who had a great deal of front-to-back wobble at 5 ft 9 in reports it simply gone
- The paddle's live height readout turns out to matter in practice: owners use it to stop the desk above a drawer unit rather than guessing
- The 22.5-inch minimum is low enough that owners fitting flush drawer pedestals have to set a lower limit to avoid the desk descending onto them
- Frame-only means people pair it with the slab they actually wanted — rough-sawn walnut and butcher block builds are common
- Owners rate it well against four-leg alternatives on price, having cross-shopped it against the more expensive options
Common complaints
- It is a base only, so a realistic complete desk costs several hundred more than the frame price suggests
- Deskhaus currently sells it as a preorder, so it ships weeks after ordering
- The brand's prominence in enthusiast discussion has itself been questioned, including concerns about moderation overlap in the communities where it is recommended — worth knowing when weighing enthusiastic write-ups
Questions owners ask
Is a four-leg frame really necessary?
What does a complete desk actually cost?
Will a drawer unit fit under it?
Apex Pro or Peak Pro?
Deskhaus Apex Pro, head-to-head
Desks people look at alongside it
More from Deskhaus →
Deskhaus
Deskhaus Peak Pro
The Peak Pro is the Apex Pro's three-stage sibling: same four independent motors, same 600 lb rating, same twenty-year warranty, but 25.5 inches of travel that tops out at 51.1 — high enough for someone around 6 ft 6 in to stand at properly. It spans tops up to 80 inches wide, and instead of crossbars it uses support wedges under the surface to take the flex out of a long span, which keeps the floor clear. The trade against the Apex is at the bottom: the three-stage columns start at 25.6 inches rather than 22.5. That is a real loss for shorter users and the reason the cheaper Apex remains the better desk for a lot of people. Think of the Peak as the tall person's version, not the upgraded one.
Fits 5′4″ to 6′10″ (est.)
Best for: Tall users with wide tops, where the ceiling matters more than how low the desk goes.
Full spec sheetThis is the answer to the complaint that follows every two-leg desk. Four columns, one motor each, a telescoping frame that spans 42 to 80 inches, and a 535 lb rating — the wobble that owners describe on wide two-leg tops at standing height largely stops being a topic. The height window is identical to the two-leg V3 because it uses the same three-segment columns, so nothing is given up on fit: it still reaches 22.6 inches for sitting and 48.7 for standing. What you pay is money, floor space and assembly time. Four legs mean more hardware than the two-leg desk, the extra legs take floor space a rolling drawer unit wants, and the entry price is $959 against $599. For an 80-inch top, a heavy tower on the frame or a three-monitor arm, that is the trade most owners who upgraded say they should have made first time.
Fits 4′9″ to 6′7″ (est.)
Best for: Wide tops, heavy multi-monitor rigs, or anyone who has already owned a two-leg desk and been annoyed by it.
Full spec sheet
One motor in each of four legs, a ten-year structural warranty, and the clean look Branch sells on — this is the four-leg desk for an office that has to look like a room rather than a workstation. It removes the wobble problem structurally, the way every four-leg desk does, and it does it without crossbars. But the numbers underneath are modest for the money. The 225 lb rating is the lowest of any four-leg desk here, lower than several two-leg frames costing half as much, and the 44.6-inch ceiling is the lowest maximum of any powered desk in this catalog — by the standing-elbow rule that is about right for a 6 ft user and short for anyone taller. At $1,099 it costs more than four-leg frames here rated for well over twice the load. Buy it for the design and the warranty; it is not the spec-sheet choice.
Fits 5′8″ to 6′0″ (est.)
Best for: A visible office where four-leg steadiness and a clean look matter more than reach or capacity.
Full spec sheet