Herman Miller Nevi Sit-to-Stand vs Ergonofis Shift
Herman Miller
Herman Miller Nevi Sit-to-Stand
Fits 4′8″ to 6′6″ (est.)
The Nevi is Herman Miller's own sit-to-stand table rather than an acquired one, and it is built for the contract market — specified by the hundred for offices, with a twelve-year warranty on the surface and the structure. The extended-range frame reaches 22.5 inches at the bottom, which puts it among the lowest desks here, and 48.5 at the top. The plain frame does not: it starts at 28.5 inches, the height of an ordinary fixed desk, and that is the version quoted in a lot of listings. Getting that distinction right is the whole buying decision. Square legs, a four-position memory switch and a laminate square-edge top make it deliberately unremarkable to look at, which is the point in an office of fifty. For a home buyer the friction is the size range: Herman Miller's own store sells only a 46×23 and a 58×29, the 48 to 72-inch contract sizes go through dealers, and the five-year electronics cover trails the frame by seven.
Ergonofis
Ergonofis Shift
Fits 5′3″ to 6′10″ (est.)
The Shift is Ergonofis for people who want the look without the solid-wood premium. A different frame from the Sway's, running from about 25¼ to 51 inches at the work surface, with 300 lb of capacity and a ¾-inch soft-touch laminate top, the only surface it is sold with. The design language carries across: clean lines, a discreet handset, and a desk meant to sit in a living space rather than a home office. It still costs more than the mid-market without out-specifying it, which is the consistent story for this brand: about $840, billed in Canadian dollars, for 300 lb of lift and no published noise figure is hard to justify on the spec sheet alone. Buy it because you like it, which is a legitimate reason to buy furniture.
Where they actually differ
- The Herman Miller Nevi Sit-to-Stand gets 2.8″ lower, which matters if anyone using the desk is short — it reaches a sitting height for people down to about 4′8″, against 5′3″ for the Ergonofis Shift.
- The Ergonofis Shift reaches 2.5″ higher, suiting standing users to about 6′10″ against 6′6″.
- The Ergonofis Shift is rated for 50 lb more lift, though most home setups stay well under either figure.
- The Ergonofis Shift is about $310 cheaper as configured — note what each price actually includes, since one may be a bare frame.
- Frame cover runs longer on the Herman Miller Nevi Sit-to-Stand (12 yr frame / 5 yr electronics / 12 yr top). The electronics figure is the one worth reading twice — it is usually the part that fails.
Every line above is generated from the two spec sheets, not from an opinion. Height ranges are quoted on each maker's own basis — check both desk pages before comparing the figures directly.
| Spec | Herman Miller Nevi Sit-to-Stand | Ergonofis Shift |
|---|---|---|
| Approx. price | ~$1,150 | ~$840 |
| Height range | 22.5″–48.5″ | 25.25″–50.95″ |
| Travel | 26″ | 25.7″ |
| Fits users | 4′8″ to 6′6″ | 5′3″ to 6′10″ |
| Lift capacity | 250 lb | 300 lb |
| Leg stages | 2-stage | 2-stage |
| Motors | 2 motors | 2 motors |
| Speed | not published | 1.5 in/s |
| Noise | not published | not published |
| Memory presets | 4 | 4 |
| Anti-collision | Motor current | Motor current |
| Crossbar | No | No |
| Leg shape | Square | Rectangular |
| Warranty | 12 yr frame / 5 yr electronics / 12 yr top | 10 yr frame / 5 yr electronics / 5 yr top |
| Assembly | Full DIY | Full DIY |
| Cable management | Optional | Optional |
| Desktop sizes | 46×23, 58×29 | 48×24, 60×30, 72×30 |
| Desktop materials | Laminate | Laminate |
| Type | Electric 2-stage | Electric 2-stage |
Tinted rows are the specs on which these two desks differ.