Herman Miller Jarvis Laminate vs iMovR Lander
Herman Miller
Herman Miller Jarvis Laminate
Fits 5′4″ to 6′10″ (est.)
The laminate Jarvis is the cheaper of the two configurations that survived, and it is the more interesting one for fit, because Herman Miller sells it on three frames. The three-stage frame runs 25.6 to 51.1 inches with the 1-inch top; the two-stage frame starts at 30 inches, the height of an ordinary fixed desk, for $100 less; and a 3 Stage Low frame drops to 23 inches for shorter users at the cost of a 43.4-inch ceiling. That is a real choice at the point of order, and one people get wrong: pick the frame by the shortest and the tallest person who will use the desk, not by the price. The laminate comes in six finishes, a powered grommet with a socket and USB is a $50 option, and the mechanicals are identical to the bamboo model.
iMovR
iMovR Lander
Fits 4′10″ to 6′7″ (est.)
The Lander's selling point is that it arrives almost built. iMovR bonds the top to the frame at its factory in Michigan and ships it as close to one piece as a desk that size can be, so setup is a matter of minutes rather than an afternoon — the single biggest complaint about every other desk in this catalog simply does not apply. The 3D-laminate surface is a seamless thermoformed skin with no visible edge band to peel, which is a real durability advantage over the edge-banded tops that dominate the price bracket, and it is covered for ten years along with the motors and electronics, while the steel frame has a lifetime warranty. The 23-inch minimum is genuinely low and the 315 lb rating is ample. What you pay is money and choice: $1,195 is the entry point, the finishes are fewer than a configurator-driven brand offers, and this is a made-to-order product with a lead time rather than something that ships tomorrow.
Where they actually differ
- The iMovR Lander gets 2.6″ lower, which matters if anyone using the desk is short — it reaches a sitting height for people down to about 4′10″, against 5′4″ for the Herman Miller Jarvis Laminate.
- The Herman Miller Jarvis Laminate reaches 2.1″ higher, suiting standing users to about 6′10″ against 6′7″.
- The Herman Miller Jarvis Laminate is rated for 35 lb more lift, though most home setups stay well under either figure.
- The iMovR Lander is about $100 cheaper as configured — note what each price actually includes, since one may be a bare frame.
- Frame cover runs longer on the iMovR Lander (lifetime frame / 10 yr electronics / 10 yr top). The electronics figure is the one worth reading twice — it is usually the part that fails.
Every line above is generated from the two spec sheets, not from an opinion. Height ranges are quoted on each maker's own basis — check both desk pages before comparing the figures directly.
| Spec | Herman Miller Jarvis Laminate | iMovR Lander |
|---|---|---|
| Approx. price | ~$1,295 | ~$1,195 |
| Height range | 25.6″–51.1″ | 23″–49″ |
| Travel | 25.5″ | 26″ |
| Fits users | 5′4″ to 6′10″ | 4′10″ to 6′7″ |
| Lift capacity | 350 lb | 315 lb |
| Leg stages | 3-stage | 3-stage |
| Motors | 2 motors | 2 motors |
| Speed | 1.5 in/s | 1.6 in/s |
| Noise | 50 dB | not published |
| Memory presets | 4 | 4 |
| Anti-collision | Motor current | Motor current |
| Crossbar | No | No |
| Leg shape | Rectangular | Rectangular |
| Warranty | 7 yr frame / 7 yr electronics / 5 yr top | lifetime frame / 10 yr electronics / 10 yr top |
| Assembly | Full DIY | Preassembled top |
| Cable management | Optional | Included |
| Desktop sizes | 48×27, 60×27, 72×30 | 47×30, 53×30, 59×30, 65×30, 71×30, 77×30, 83×30, 89×30, 95×30 |
| Desktop materials | Laminate | 3D laminate, Solid wood |
| Type | Electric 3-stage | Electric 3-stage |
Tinted rows are the specs on which these two desks differ.